- First, open & empty dust bin, then… 1. Unlock mesh pre-filter: twist counter-clockwise to "click" open. 2. Remove mesh pre-filter. 3. Remove air filter by pulling firmly. 4. Tap on inside edge of trash can to remove loose dust and debris. 5. Use filter maintenance brush to clear any trapped dust and debris from mesh openings and fabric pleats. 6. Rinse filter and mesh pre-filter thoroughly under cold running water, after removing as much debris as possible using above steps. 7. Allow air filter parts to dry completely before re-installing. Minimum dry time: 24 hours.
Models: STEVA+ STP010 / VAC+ VAP010 / VACPAC+ VAP110
Comments
0 comments
Article is closed for comments.